Manual Pensky Martens Flash Point Tester
The Manual Pensky Martens Flash Point Tester measures the flashpoint at the lowest temperature at which the application of an ignition source causes the vapours of a sample to ignite.
The apparatus is a benchtop model which houses the air bath stove and the stirrer motor: differently from other apparatus on the market, our instrument is equipped with a fan that cools down the stove quickly after the test.
A stainless steel test cup as an alternative to the standard type made of brass, is available upon request. It was developed for applications with aggressive or corrosive samples.
Technical Specification
| Temperature | From 40 to 360 Degree C |
| Power supply | 230Volts |
| Power | 700Watts |
| Dimensions | 40x33x52 cm |
| Weight | 11 kg |
Product Description
Other Details:
- Electrically heated by the electronic regulator, mounted on a case
- Painted with anti-acid epoxides products. Calibrated brass test
- Cup, cover with gas or electric ignition device allowing to ignite
- The testing sample by a manual trip-opening. Motor stirrer for
- Procedure “A” and “B”, air bath and cooling fan
- Stirrer pot : We can use this pot for stirrer speed.
- Heating pot : We can use this pot for Heating purpose.
- Gas Regulator : Use to adjust the gas flame while performing the operation.
- Cooling is use for after sample & heating use while we perform the operation.
- How To Dip Ignitor : On Left hand side Press Green Button when we press green button the stirrer will STOP , & at the same time push stick towards operator.
- Operator can take 40 °C Upto 360 °C.
